Quick clean and complete release of products from molds is essential. Silchem offers a full line of release agents for rubber and plastic. Silicone based release agents offer good performance, heat resistance, thermal oxidation stability, good wetting and gloss enhancement. Included in the product line are a variety of both semi-permanent and every cycle application release agents. |
![]() |
SEM108 is an organo functional silicone polymer emulsion which offers enhanced lubrication and release properties. In most applications it outperforms standard silicone fluids. SEM108 enhanced properties may decrease the number of rejected parts and may offer cost savings to the user because of higher performance at lower usage levels.
SEM108-50 is an organo functional silicone polymer emulsion which offers enhanced lubrication and release properties. In most applications it outperforms standard silicone fluids. SEM108-50 enhanced properties may decrease the number of rejected parts and may offer cost savings to the user because of higher performance at lower usage levels.
SEM169 is a 50% silicone emulsion formulated with a silicone MQ resin. This degree of resin modification is low suggesting use in mold release applications and in polish formulations. MQ resin increases release characteristics of silicone fluids and enhances luster and shine properties.
SEM-AC2G is a 50% active, curable silicone emulsion formulated with a silicone MQ resin to enhance its release properties. SEM-AC2G is intended for the mold release of rubber item including cast polyurethane elastomers.
SEM261 is a 60% solids emulsion formulated with a 350cs viscosity silicone fluid. This emulsion exhibits a very low order of toxicity and possesses no objectionable odors.
SEM260 is a 60% solids emulsion formulated with a 100CS viscosity silicone fluid. This emulsion exhibits a very low order of toxicity and possesses no objectionable odors.
SEM260 is a 60% solids emulsion formulated with a 100CS viscosity silicone fluid. This emulsion exhibits a very low order of toxicity and possesses no objectionable odors.
SEM209-35 is a silicone emulsion formulated with a 10,000 centistoke dimethyl fluid. This emulsion exhibits a very low order of toxicity and possesses no objectionable odors.
The DF55-5 is low viscosity polydimethylsiloxane polymer. This clear, inert, non-toxic fluid is characterized by relatively flat viscositytemperature relationships, shear stability, low surface tension and excellent thermal and oxidation stability.
DF55-10 is a polydimethylsiloxane fluid with a viscosity of 10 cps. DF55-10 is a clear, oily fluid; both inert and tasteless. It is designed to meet specific silicone fluid requirements in industrial, military andor consumer applications. SILCHEM offers a complete line of silicone fluids that give superior performance in a wide variety of applications.
The DF55 Series of silicone fluids: 50, 100, 200, 350, 500 and 1,000 centistokes, are medium viscosity polydimethylsiloxane polymers. These clear, inert, non-toxic fluids are characterized by relatively flat viscositytemperature relationships, shear stability, low surface tension and excellent thermal and oxidation stability. The DF55 Series offers superior performance in a wide variety of applications.
The DF55 Series of silicone fluids: 50, 100, 200, 350, 500 and 1,000 centistokes, are medium viscosity polydimethylsiloxane polymers. These clear, inert, non-toxic fluids are characterized by relatively flat viscositytemperature relationships, shear stability, low surface tension and excellent thermal and oxidation stability. The DF55 Series offers superior performance in a wide variety of applications.
The DF55 Series of silicone fluids: 50, 100, 200, 350, 500 and 1,000 centistokes, are medium viscosity polydimethylsiloxane polymers. These clear, inert, non-toxic fluids are characterized by relatively flat viscositytemperature relationships, shear stability, low surface tension and excellent thermal and oxidation stability. The DF55 Series offers superior performance in a wide variety of applications.
The DF55 Series of silicone fluids: 50, 100, 200, 350, 500 and 1,000 centistokes, are medium viscosity polydimethylsiloxane polymers. These clear, inert, non-toxic fluids are characterized by relatively flat viscositytemperature relationships, shear stability, low surface tension and excellent thermal and oxidation stability. The DF55 Series offers superior performance in a wide variety of applications.
The DF55 Series of silicone fluids: 50, 100, 200, 350, 500 and 1,000 centistokes, are medium viscosity polydimethylsiloxane polymers. These clear, inert, non-toxic fluids are characterized by relatively flat viscositytemperature relationships, shear stability, low surface tension and excellent thermal and oxidation stability. The DF55 Series offers superior performance in a wide variety of applications.
The DF55 Series of silicone fluids: 50, 100, 200, 350, 500 and 1,000 centistokes, are medium viscosity polydimethylsiloxane polymers. These clear, inert, non-toxic fluids are characterized by relatively flat viscositytemperature relationships, shear stability, low surface tension and excellent thermal and oxidation stability. The DF55 Series offers superior performance in a wide variety of applications.
The DF55 Series of silicone fluids: 5,000, 10,000, 12,500, 30,000 and 60,000 centistokes, are intermediate viscosity polydimethylsiloxane polymers. These clear, inert, non-toxic fluids are characterized by relatively flat viscositytemperature relationships, shear stability, low surface tension and excellent thermal and oxidation stability. The DF55 Series offers superior performance in a wide variety of applications.
The DF55 Series of silicone fluids: 5,000, 10,000, 12,500, 30,000 and 60,000 centistokes, are intermediate viscosity polydimethylsiloxane polymers. These clear, inert, non-toxic fluids are characterized by relatively flat viscositytemperature relationships, shear stability, low surface tension and excellent thermal and oxidation stability. The DF55 Series offers superior performance in a wide variety of applications.
The DF55 Series of silicone fluids: 5,000, 10,000, 12,500, 30,000 and 60,000 centistokes, are intermediate viscosity polydimethylsiloxane polymers. These clear, inert, non-toxic fluids are characterized by relatively flat viscositytemperature relationships, shear stability, low surface tension and excellent thermal and oxidation stability. The DF55 Series offers superior performance in a wide variety of applications.
The DF55 Series of silicone fluids: 5,000, 10,000, 12,500, 30,000 and 60,000 centistokes, are intermediate viscosity polydimethylsiloxane polymers. These clear, inert, non-toxic fluids are characterized by relatively flat viscositytemperature relationships, shear stability, low surface tension and excellent thermal and oxidation stability. The DF55 Series offers superior performance in a wide variety of applications.
The DF55 Series of silicone fluids: 5,000, 10,000, 12,500, 30,000 and 60,000 centistokes, are intermediate viscosity polydimethylsiloxane polymers. These clear, inert, non-toxic fluids are characterized by relatively flat viscositytemperature relationships, shear stability, low surface tension and excellent thermal and oxidation stability. The DF55 Series offers superior performance in a wide variety of applications.
DF97 is a silicone polymer which offers enhanced lubrication and release properties. In most applications it outperforms standard silicone fluids. DF97 enhanced properties may decrease the number of rejected parts and may offer cost savings to the user because of higher performance at lower usage levels.
DF55 100,000 is a high viscosity, clear, inert silicone fluid which is characterised by low surface tension, excellent thermal stability and a relatively flat viscosity/temperature relationship.
R1005 is a general purpose, water based, semi-permanent mold release that forms a tough, durable film that is an excellent mold release primarily for use in sulphur cured rubber molding applications. R1005 is formulated for excellence in rubber-to –metal bonding.
R1006 is a water based semi-permanent mold release that forms a vey hard durable film. R1006 is more durable than the R1005. Molders report excellent release of the most difficult to release materials, including peroxide cured EPDM, HNBR and ECO. R1006 is formulated for excellence in rubber-to-metal bonding.
R1010 is a water based semi-permanent mold release agent intended where it is desirable for the mold release coating to cure at ambient or slightly elevated temperatures. R1010 can also be used in hot molding applications. The service temperature is up to 400°F. R1010 is very well suited for FRP mold release and has excellent release for epoxy, polyester, ABS, nylon, polyurethane and many other resins and elastomers, with the exception of silicone. R1010 cures quickly. Molding can begin as soon as the water has evaporated.
R1021 is a water based semi-permanent mold release agent created for the easy release of silicone rubber. R1021 is a silicone-free fluoropolymer formulation that effectively releases most elastomers and will produce excellent results in thermoset plastic molding applications.
R1022 is a water based semi-permanent mold release agent created for the easy release of silicone rubber. R1022 is a silicone-free, PTFE enhanced fluoropolymer formulation that effectively releases most elastomers. R1022 assists in the demolding of products produced by compression, transfer and injection molding.
R1022 is also used as a mandrel release for the production of silicone tubing and hoses. R1022 displays immediate adhesion to clean mold surfaces and is quickly ready for the production of quality parts.